|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number : ENN8368 SCH2821 SCH2821 Features * * MOSFET : N-Channel Silicon MOSFET SBD : Schottky Barrier Diode General-Purpose Switching Device Applications * Composite type with an N-channel silicon MOSFET and a schottky barrier diode contained in one package facilitating high-density mounting. [MOSFET] * Low ON-resistance. * Ultrahigh-speed switching. * 4V drive. [SBD] * Short reverse recovery time. * Low forward voltage. Specifications Absolute Maximum Ratings at Ta=25C Parameter [MOSFET] Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature [SBD] Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle 15 15 0.5 3 --55 to +125 --55 to +125 V V A A C C VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm2!0.8mm) 1unit 20 12 1.6 6.4 0.6 150 --55 to +125 V V A A W C C Symbol Conditions Ratings Unit Marking : QW Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 63005PE MS IM TB-00001455 No.8368-1/6 SCH2821 Electrical Characteristics at Ta=25C Parameter [MOSFET] Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage [SBD] Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time VR VF IR C trr IR=0.5mA IF=0.5A VR=6V VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit. 15 0.4 13 10 0.46 90 V V A pF ns V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 RDS(on)3 Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VSD ID=1mA, VGS=0V VDS=20V, VGS=0V VGS=9.6V, VDS=0V VDS=10V, ID=1mA VDS=10V, ID=800mA ID=800mA, VGS=10V ID=400mA, VGS=4.5V ID=400mA, VGS=4V VDS=10V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. VDS=10V, VGS=10V, ID=1.6A VDS=10V, VGS=10V, ID=1.6A VDS=10V, VGS=10V, ID=1.6A IS=1.6A, VGS=0V 1.2 0.9 1.5 90 130 145 158 36 27 6.6 9.8 24.5 10 4.9 0.61 0.74 0.81 1.2 120 185 210 20 1 10 2.6 V A A V S m m m pF pF pF ns ns ns ns nC nC nC V Symbol Conditions Ratings min typ max Unit Package Dimensions unit : mm 7028-003 1.6 0.05 0.2 Electrical Connection 6 5 4 654 0.2 1 : Gate 2 : Source 3 : Anode 4 : Cathode 5 : Drain 6 : Drain Top view 1.6 1.5 1 1 23 0.5 0.56 2 3 0.05 1 : Gate 2 : Source 3 : Anode 4 : Cathode 5 : Drain 6 : Drain SANYO : SCH6 0.25 No.8368-2/6 SCH2821 Switching Time Test Circuit [MOSFET] trr Test Circuit [SBD] VIN 10V 0V VIN VDD=10V Duty10% 100mA 10mA trr ID=800mA RL=12.5 PW=10s D.C.1% 10s G --5V SCH2821 P.G 50 S 8.0V 6.0V .5V 4 .0V 1.6 ID -- VDS =2 V GS [MOSFET] 1.6 ID -- VGS VDS=10V 100mA D VOUT 50 100 10 [MOSFET] 3.0 .5V 1.4 1.2 1.0 0.8 0.6 Drain Current, ID -- A 0.8 Drain Current, ID -- A 10V 1.2 5.0 V4 V C 0.4 0.2 0 0 0.5 1.0 1.5 2.0 0.4 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 2.5 25C --2 5C 3.0 Ta=7 5 3.5 300 Drain-to-Source Voltage, VDS -- V IT09848 RDS(on) -- VGS [MOSFET] Ta=25C 300 Gate-to-Source Voltage, VGS -- V IT09849 RDS(on) -- Ta [MOSFET] Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 250 250 ID=0.8A 200 200 0.4A 150 150 I D= 100 100 V =4.5 VGS 4A, 0. I D= =10V A, V GS I D=0.8 , VG 0.4A 4V S= 50 50 0 0 2 4 6 8 10 IT09850 0 --60 --40 --20 0 20 40 60 80 100 120 140 160 Gate-to-Source Voltage, VGS -- V Ambient Temperature, Ta -- C IT09851 No.8368-3/6 SCH2821 3 yfs -- ID VDS=10V 25 C 5 [MOSFET] Forward Transfer Admittance, yfs -- S 2 1.0 7 5 3 2 0.1 7 5 3 2 7 5 3 IS -- VSD [MOSFET] VGS=0V C 2 Source Current, IS -- A = Ta --2 1.0 7 5 3 2 0.1 7 5 3 2 75 C 5C 0.01 0.001 2 3 5 7 0.01 2 3 5 7 0.1 2 3 Drain Current, ID -- A 3 2 5 7 1.0 2 IT09852 0.01 0.4 0.5 0.6 0.7 --25 C 0.8 Ta= 7 25C 0.9 1.0 1.1 SW Time -- ID [MOSFET] VDD=10V VGS=10V Ciss, Coss, Crss -- pF 5 3 2 IT09853 Diode Forward Voltage, VSD -- V Ciss, Coss, Crss -- VDS [MOSFET] f=1MHz Switching Time, SW Time -- ns 100 7 5 3 2 Ciss td(off) 100 7 5 3 2 tf 10 7 5 3 2 1.0 0.01 td(on) Coss Crss tr 10 2 3 5 7 0.1 2 3 5 Drain Current, ID -- A 10 9 1.0 IT09854 10 7 5 3 2 7 0 2 4 6 8 10 12 14 16 18 20 VGS -- Qg [MOSFET] IT09855 Drain-to-Source Voltage, VDS -- V ASO [MOSFET] Gate-to-Source Voltage, VGS -- V VDS=10V ID=1.6A Drain Current, ID -- A <10s IDP=6.4A 1m 10 0 s 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 IT09856 ID=1.6A 10 10 s m s 1.0 7 5 3 2 0.1 7 5 3 2 D C 0m op s er at io n Operation in this area is limited by RDS(on). (T a= 25 C ) 0.01 0.01 Ta=25C Single pulse Mounted on a ceramic board (900mm2!0.8mm) 1unit 23 5 7 0.1 23 5 7 1.0 23 5 7 10 23 IT09857 Total Gate Charge, Qg -- nC 0.8 Drain-to-Source Voltage, VDS -- V PD -- Ta [MOSFET] Allowable Power Dissipation, PD -- W 0.6 M ou nte do na ce 0.4 ram ic bo ard (9 00 0.2 mm 2 !0 .8m m) 1u 0 0 20 40 60 80 100 120 140 nit 160 Ambient Temperature, Ta -- C IT09858 No.8368-4/6 SCH2821 1.0 7 5 IF -- VF [SBD] 10000 7 5 3 2 IR -- VR Ta=125C [SBD] 100C Reverse Current, IR -- A Forward Current, IF -- A 3 2 1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0 5 75C 50C 25C 0.1 7 5 3 2 0.01 0 0.1 0.2 0.3 0.4 0.5 IT06804 Ta= 125 C 100 C 75 C 50 C 25C 10 15 IT06805 Forward Voltage, VF -- V Average Forward Power Dissipation, PF(AV) -- W 0.9 PF(AV) -- IO (1) Reverse Voltage, VR -- V 7 5 [SBD] C -- VR [SBD] f=1MHz Rectangular wave 0.8 0.7 0.6 0.5 180 0.4 0.3 0.2 0.1 0 0 0.2 0.4 360 360 (2) (4) (3) Interterminal Capacitance, C -- pF 1.4 Sine wave 3 2 (1) Rectangular wave =60 (2) Rectangular wave =120 (3) Rectangular wave =180 (4) Sine wave =180 0.6 0.8 1.0 1.2 10 7 5 1.0 2 3 5 7 10 2 3 Average Output Current, IO -- A 3.5 IT06806 IFSM -- t IS Reverse Voltage, VR -- V IT06807 [SBD] Surge Forward Current, IFSM(Peak) -- A Current waveform 50Hz sine wave 3.0 2.5 20ms t 2.0 1.5 1.0 0.5 0 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Time, t -- s ID00338 No.8368-5/6 SCH2821 Note on usage : Since the SCH2821 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2005. Specifications and information herein are subject to change without notice. PS No.8368-6/6 |
Price & Availability of SCH2821 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |